Old Man Emu Suspension
When undertaking remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components. Combine this with punishing off road conditions, and the limitations of standard springs soon become apparent. Whether it’s coils, leaves or torsion bars, Old Man Emu springs are designed to improve the load carrying capability of your 4WD, allowing you to tackle more challenging terrain with confidence.
Old Man Emu leaf springs are engineered to provide optimum ride performance irrespective of the conditions in which they operate.
Numerous spring options are available to suit each user’s specific needs, allowing you to set your vehicle up for recreational or commercial purposes. A set of Old Man Emu leaf springs, matched to a set of Old Man Emu 4×4 shock absorbers will deliver vastly improved ride, handling and load carrying capability.
Should your Old Man Emu 4WD suspension system include leaf springs, Old Man Emu urethane bushes require periodic lubrication to ensure longevity.
Old Man Emu greasable shackles and pins facilitate this without the need to remove the shackles, greatly reducing the time and effort involved.
ARB designs an extensive range of Old Man Emu coil springs for each vehicle, using state of the art micro-alloyed spring steel to ensure superior resistance to sagging and corrosion. With such a wide range on offer, coil springs can be better matched to your specific load requirements and intended vehicle usage.
While ride height increases are attained, a great emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle.
Old Man Emu Torsion Bars dramatically improve your vehicle’s ride and handling, both on road and off.
Designed and set for optimum ride performance with increased spring rates to suit accessory fitment, Old Man Emu Torsion Bars work best when Old Man Emu coil or leaf springs are fitted to the rear of your vehicle, with bars and springs then carefully matched to our range of 4WD shock absorbers. Together, they’ll transform your vehicle’s suspension performance.
Shock Absorbers and Springs - What do they do?
Put simply, your vehicle’s springs hold the vehicle weight and set its ride height, while the shock absorber controls the motion of the spring during compression and rebound; keeping the tyres planted firmly on the road. Both components are designed to work together, so the changing of a spring’s specification should also require the changing of the shock absorber that controls it.
Increasing the spring rate so that it is capable of carrying more load will require the shock absorber to be valved so that it can handle the increased forces of the rebounding spring whilst also providing controlled compression. Increasing a spring’s length for greater ride height will require lengthening of the shock absorber body and possibly lengthening its range of travel in order to prevent the topping or bottoming of the shock absorber.